Auto Finesse Lavish

1. Before application, ensure the vehicle is clean by carrying out the usual pre-wash and bucket wash.
2. Pour 50-100ml of Lavish Ceramic Foam into your snow foam lance and top up with water. Shake well to ensure a good mixture.
3. Apply Lavish generously from bottom to top, ensuring to cover every panel, wheel, and glass surface.
4. Allow 1-2 minutes for it to dwell on the surface.
5. Rinse thoroughly with high pressure.
6. Dry the vehicle.

Tips

• This is not a cleaning pre-wash foam, it is a last-step protective product applied via a snow foam lance.
• For best looks and durability, ensure the vehicle is clean before application.
• Lavish can be applied to a wet vehicle, so after washing, you do not need to dry the vehicle.
• Do not let Lavish dry on the surface, so ensure the surface is cool, and if possible, apply it out of direct sunlight.
• Make sure to thoroughly rinse the product from the vehicle, ensuring no traces of product are left behind. Like many other spray-on rinse-off sealants, Lavish can leave stubborn marks if not properly rinsed off.
• We've found over the years that most foam lance-applied protective products can lead to blockages. We like to run warm water and sometimes degreaser through the lance bottle after use, this helps to keep the pick-up pipe, injector, and gauze as clean as possible.