Gtechniq C4 Permanent Trim Restorer
Gtechniq C4 utilises a covalent bond to become an extension of the plastic molecule it's protecting. Not to be confused with weaker electrostatic bonds used by, amongst others, PTFE based polymers C4 swaps part of it's molecular structure with the surface molecules of your vehicles trim.
What the above means is that you not have a protective coating on your cars trims with unparalleled durability. Unlike many trim products on the market Gtechniq C4 is an exceptionally thin (around 30nm) optically clear film which means it does not add an unattractive gloss film to the surface, instead it restores all but the most faded trim to an as new condition.
Gtechniq C4 not only restores trim back to it's former glory but it's also incredibly durable too. You can expect a single application of Gtechniq C4 to last up to 2 years!
Features of Gtechniq C4 Permanent Trim Restorer
- Restore faded trim
- Dries optically clear, no unattractive gloss
- Up to two years of durable protection
How to use Gtechniq C4 Permanent Trim Restorer
Before use ensure it's applied at a temperature above 5 degrees Celsius and not in direct sunlight. If application is done indoors ensure there is adequate ventilation. It's recommended to wear protective gloves to prevent the product drying out your skin.
Before applying C4 ensure the surface is clean and free on oils and contaminants. Clean trim vigorously with a 1:10 dilution of Gtechniq W2 Universal Cleaner.
Soak the application pad with several drops C4 Permanent Trim Restorer. Evenly and thinly apply onto a single piece of trim and immediately remove with a Gtechniq MF1 Microfibre Towel. Work in small areas at a time.
If you require additional application pads, they can be found here: Gtechniq AP1 Lint Free Applicators.
Allow the coating to cure for 12 hours before getting wet.
Use C4 Permanent Trim Restorer within 1 year of purchasing. Store opened bottles in a dry and cool storage area that's out of direct sunlight. We recommend only using opened bottles within three months of opening.
Please note that C4 does not contain any black pigment so if your trim is exceptionally bleached, it may not fully restore its as new appearance. A good way to test if your trim will be recoloured satisfactorily by the product, is to wipe a damp microfibre cloth over the finish. If your trim colour is temporarily restored by the wetness of the cloth then it is most likely that C4 will work to restore your trim.
If coating heavily textured trim you need to ensure that all coating residue is fully removed from the deep crevices of your trim as if not it may turn into an unsightly white powdery residue in the crevices. If you are coating heavily textured trim it is very important you prepare the trim very well using the W2 as described above together with a medium brush. We also recommend to use "long pile" microfibre cloths to better remove residue from the crevices of your trim
Size: 15ml & 30ml
Video of Gtechniq C4