Gtechniq C1 Crystal Lacquer
Gtechniq C1 Crystal Lacquer is a durable paint coating which offers 3-5 years of protection and excellent swirl and scratch resistance. This tough paint sealant leaves a crystal clear finish and keeps the paintwork looking glossy for longer.
C1 Crystal Lacquer forms a crystalline film which is extremely hard, this characteristic makes it effective at preventing minor scratching from washing and drying.
Features of Gtechniq C1 Crystal Lacquer
- 3-5 years durability
- Excellent swirl mark resistance
- Glossy, crystal clear finish
How to use Gtechniq C1 Crystal Lacquer
Ensure vehicle is clean and polished before application. We recommend the use of gloves whilst applying C1 Crystal Lacquer. Ensure the vehicle is wiped down with Gtechniq Panel Wipe to remove any residues from the surface and allow C1 Crystal Lacquer to bond to the paintwork.
Ensure vehicle is out of direct sunlight but warmer than 5 degrees celsius. Also the vehicle will need to remain dry for at least 3 hours after application.
Dab a small amount of C1 Crystal Lacquer on to the applicator pad. Replace the cap on the C1 and put it down, do not leave it in your hand as it can cause it to cure. We recommend changing the application pad after 3-4 applications of areas no bigger than half a car bonnet.
Wipe the applicator across the paintwork, spreading it evenly and thinly. After 30-60 seconds later buff with a clean microfibre towel. The use of two microfibre towels will aid this process. Do not use much force whilst buffing
As soon as you have finished soak the microfibres in water, wash and dry them as soon as possible as the C1 may crystallise in the towel.
Allow the coating to cure for 12 hours.
Available in both 30ml & 50ml sizes.
30ml is usually adequate for most hatchback sized cars (VW Golf, Ford Focus etc). 50ml is suitable for larger vehicles like estates, 4x4's and smaller commercial vehicles like vans.