- Brand: Bilt Hamber
- Product Code: BHDUC750
Bilt Hamber Dynax UC
Clear Anti Corrosion Wax
Bilt Hamber Dynax UC is a high performance anti corrosion wax which forms a protective shield with a low film thickness and is ultra clear. Dynax UC can be used on bare metal or painted surfaces, in fact it can be used anywhere where a discrete and powerful inhibitor is required.
Dynax UC's wax like film is rich in unique metal seeking corrosion inhibitors that stop existing and preventing new corrosion. Dynax UC is safe to use on most paint coatings and is ideal where dark coloured waxes or undersea would detract from the painted finish of vehicle bodywork or underside.
The tough wax film provides mechanical protection to the surface too. Dynax UC is the ideal product to provide high levels of protection during the winter months, use on lower body panels, chassis, floors, sills, jacking points, suspension, wheel arches and much more. Dynax UC can be easily removed if required with alkaline based degreasers after the aggressive winter months pass or it can be left it place for prolonged protection.
The large 750ml areosols are equipped with a unique valve and cans are charged to 70psi so they can work on their side or even upside down.
Features of Bilt Hamber Dynax UC
- Long term protection applied in seconds
- Tough film that dries clear
- Contains corrosion inhibitors
- Low thickness
How to use Bilt Hamber Dynax UC
Surfaces should be cleaned before hand with a steam cleaner or a pressure washer and a degreaser. Rinse the surface and dry. For best results the surface should ideally be wiped over with a Panel Wipe.
Apply Dynax UC is fine coats, film thickness should be built in this way instead of a single heavy coat. Dynax UC will cure to it's final firmness after 24-96 hours, although the vehicle can be used after just 30 minutes if necessary.